| 设为主页 | 保存桌面 | 手机版 | 二维码

亿煤机械装备制造有限公司

运转设备, 矿用支护设备, 矿用提升设备, 喷浆设备, 铁路器材, 排水设备

产品分类
  • 暂无分类
站内搜索
 
友情链接
  • 暂无链接
您当前的位置:首页 » 供应产品 » 浙江工业脚轮冲击试验机_浙江脚轮试验机厂家
浙江工业脚轮冲击试验机_浙江脚轮试验机厂家
点击图片查看原图
产品: 浏览次数:117浙江工业脚轮冲击试验机_浙江脚轮试验机厂家 
单价: 面议
最小起订量:
供货总量:
发货期限: 自买家付款之日起 天内发货
有效期至: 长期有效
最后更新: 2017-07-15 14:11
  询价
详细信息

“浙江工业脚轮冲击试验机_浙江脚轮试验机厂家”参数说明

是否有现货: 认证: 国标
品牌: 正杰 加工定制:
最低起批量: 1台 供应类型: 混批
类型: 落球冲击试验机 冲击能量: 500
冲击速度: 15 外形尺寸: 58.5×69.5×181.5cm
重量: 230kg 适用范围: 工业脚轮
型号: ZJ-8009 规格: 58.5×69.5×181.5cm
商标: 国标 包装: 木箱
产量: 10000

“浙江工业脚轮冲击试验机_浙江脚轮试验机厂家”详细介绍

ZJ-8009 浙江工业脚轮冲击试验机_浙江脚轮试验机厂家,为正杰厂家生产,定制生产,按客户要求生产

一,ZJ-8009脚轮冲击试验机介绍:
欧洲的脚轮测试标准中抗冲击测试方法是:将脚轮垂直倒向安装在地面测试平台上,使质量为5KG(±2%)的重物从高度为200mm,允许偏差±3mm,的位置自由落下冲击脚轮的轮边,如果为两轮则两个轮应同时冲击。在整个实验过程中不允许脚轮的任何部位分离。且实验完成后脚轮的滚动,绕轴转动或制动功能不应受损。具体冲击原理是:通过电机传动,带动链条上升下降,通过电磁铁吸盘吸住砝码落锤,到达设定的高度,电磁铁自动断电,落锤冲击脚轮。可对旅行箱、溜冰鞋、童车、手推车及工业脚轮等轮子的测试。

二,ZJ-8009脚轮冲击试验机主要技术参数:
1、允许试件最大重量:50kg±100g
2、冲击高度:0~1000MM或指定
3、落锤重量:5 KG±0.2 KG或指定)
4、电机功率:400W5、冲击刃:  (ANSI)ф2
5、冲击速度1-5
6、传动方式:电机+导杆+软性传动机
7、冲击荷重提取方式:自动
8、冲击方式:电动自由下冲
9、高度标尺:钢尺最小指示:1mm
10、安全梢:1
11、过冲保护柱:2
12、安全防护框:约800*800*500mm

Test methods for impact test standards in Europe are casters: casters installed in the ground vertical backward test platform, so that the quality of 5KG (+ 2%) the weights from the height of 200mm, the allowable deviation of + 3mm, the position of the free falling impact of caster wheel, if two rounds of two round should also impact. No part of the caster was allowed to separate during the entire experiment. And after the completion of the experiment, casters rolling, rotating around the shaft or braking function should not be damaged. The specific impact principle is: through the drive motor and drives the chain up and down through the electromagnet suction disc weight drop, reaching the set height, automatic power-off electromagnet, drop hammer caster. Tests for wheels such as suitcases, skates, baby carriages, trolleys, and industrial casters are available.
询价单
0条  相关评论